Electrical Products
6-8 Pin Plug Adapter
6-8 Pin Plug Adapter for 04 - Up Sportsters. Works in conjunction with The Flasher (CV4805), and the Eliminator Tail Light Assembly (CV4806).
Bag Lites
These slick, chrome-plated LED Circular Bag Lites come with a special feature available nowhere else - a run-turn-brake controller (which only controls these lights) that illuminates the turn mode amber and the run and brake function in red.
Complete with gasket and simple plug-in wiring. Fits 96 & Up 8-pin connector. If you are eliminating your rear stock turn signals and using the Bag Lites as your only rear turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820).
NO painting required! With wiring modifications, Bag Lites can be mounted onto any flat surface. Works on Road King Classic leather bags all fiberglass bags.
Custom Chopper Wire Harness
Wiring made easy for custom motorcycles. Custom Applications Only. Comes with keyed on/off start switch, hi/lo toggle switch, fused circuits and wire ends.
Eliminator
Clean up the clutter on the back of your bike. Combine several components into one with the Eliminator™. On FLH models this neatly replaces your existing taillight, turn signal assembly and license plate mount (plug-in wiring is included). Covers all existing holes and no painting required. On all Softail's and Sportster's, if you remove the existing turn signals you must replace them with "button head" bolts (not included). On all Dyna's, if you remove the existing turn signals you must replace them with "button head" bolts and Recess cover PN 47531-06(not included). The Eliminator™ is the perfect companion to our Baglites™. Made from aluminum, polished and chrome plated, our lights are LED. Brighter, safer, cooler.
Illumabezel
Give your bike a facelift with our chrome-plated plastic bezel, smoked gray lens and integrated L.E.D. run and turn signal. Fits 98 & Up Road Glide® Fairings.
Patent pending.
Load Equalizers
There are two types of load equalizers. One used with a factory alarm system, and one without. These load equalizers are recommended when changing from stock turn signals to LEDs or lights with less wattage than stock.
Maltese Cross Side Mount License Plate
This unique product incorporates the Maltese Cross Tail Light License Plate Frame and Axel Adjuster all in one. Will not work with saddlebags. Made from T-6 billet aluminum. Available in Chrome or Black Powder Coated. Includes Maltese dual filament light. Light housing is cast aluminium polished and chrome plated. Fits 4" x 7" license plates only. Not D.O.T. approved.
Ricco Bag Lights
These slick, chrome-plated LED Rectangular Bag Lites come with a special feature available nowhere else - a run-turn-brake controller (which only controls these lights) that illuminates the turn mode amber and the run and brake function in red. Complete with gasket and simple plug-in wiring. Fits 96 & Up 8-pin connector. If you are eliminating your rear stock turn signals and using the "Ricco" Bag Lights as your only rear turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820).
NOTE: Installation requires cutting a hole in the saddle bag. Comes with cutting template. Not DOT approved.
Tach Mount
Our curvaceous Tach mount is an excellent addition to Road Kings® and Softails® equipped with the Nacel headlight kit. This Tach mount accepts a 17⁄8-inch tachometer. When installed there are NO visible fasteners or wires—just chrome. For maximum usability our Tach mount fits with or without detachable windshield and windshield bag. They are machined from solid T-6 aluminum and chrome plated for a highly polished and finished look. Available with tach.
Tech Trim
Light Tech Trim. Fits 96-08 FLHT/FLHX. It is available in Chrome or Black.
Windshield Molding. fits 96-Up FLH. It is available in Chrome or Black.
The Flasher
The Flasher is a plug-in module that adds a rapid three time "flash" when breaking, and a "run/turn/brake" function to existing single filament OEM and halogen lights. IT fits rear applications on 96 & Up Softails, 97 & Up Dyna & FLH models, and 99 - 03 XL's. Not compatible with Panacea Tail Lights. If using with LED turn signals you must purchase a load equalizer (CV4820) if equipped with a factory alarm, or (CV4821) without an alarm.