CV Accessories
Attitude Stick (Sissy Bars)
Old School attitude sticks are made from 9/16 round steel bar. Maltese, Dagger and Spade styles are made from 9/16 square steel bar. Available in two sizes—approximately 30” or 18”. Side plates must be purchased separately. Fits all side plates except for Plug-N-Play®. Old School sissy bars not designed to hold passengers. Square stock will hold passengers. Part # CV8000–CV8002 fits all models and width, except Plug & Play®.
Beveled Blind Hole License Plate Frame
No visible screws makes this License plate frame ultra-cool. Chrome-plated aluminum construction.
CycleSkyns
Protect your paint from accidents while working or storing your bike. These high quality neoprene covers are form-fitted to your tank or fender size. The Saddle bag cover is only for fiberglass bags. Made from 4mil Neoprene wet suit material with or without pockets on the tanks. Perfect for storing bolts from h-bars while assembling.
Eliminator
Clean up the clutter on the back of your bike. Combine several components into one with the Eliminator™. On FLH models this neatly replaces your existing taillight, turn signal assembly and license plate mount (plug-in wiring is included). Covers all existing holes and no painting required. On all Softail's and Sportster's, if you remove the existing turn signals you must replace them with "button head" bolts (not included). On all Dyna's, if you remove the existing turn signals you must replace them with "button head" bolts and Recess cover PN 47531-06(not included). The Eliminator™ is the perfect companion to our Baglites™. Made from aluminum, polished and chrome plated, our lights are LED. Brighter, safer, cooler.
Extended Saddlebags
Stretch `em out. Our new extended saddlebags fits 97 & Up FLH models with saddlebag systems. They are made of fiberglass with a gel coat finish and come with or without exhaust cutouts. Bags are bottoms only, and accept stock HD lids and hardware. Bags are sold separately. *Shipping charges will apply due to oversized packaging.
Forward Control Extensions
For all 00 - 09 Softails with forward controls. Extends them forward 2 or 3 inches. The 3" is perfect for riders 6' 3" and taller. With the 2" extension, you may elect to rebend the stock brake line. The 3" extension requires a longer brake hose (not included in kit). The extension plates are black in color. The shift rod is made from 303 stainless steel (can be polished or chrome-plated).
Gladiator™ Axle Caps
Get right to the point with these chrome plated billet aluminum axle caps. Available in chrome or gloss black powder coated in three different styles: Smooth, Barbed, and Hex Barbed. CV4703 fits 3/4" front axle, CV3704 fits 1" or 25mm front axle, CV4705 fits rear axle (84-07 Softails, up to 05 Dynas and up to 04 XLs).
"Go-Forward" Floorboard Extensions
This "Go-Forward" moves your floorboards and pedal assembly 2" forward for a more comfortabole feel. Will not work with engine guards on FLSTS or FLSTC Heritage or Springer. Extension plates are made of 3/8 T6 billet aluminum and black powder coated. The master cylinder cover (CV-305 only) is made from 16 gauge steel polished and chrome plated. Shift rod is made from 303 stainless steel, and can be polished or chromed. CV-305 requires custom brake line available through Drag Specialties.
"In Close" License Plate Holder & Axle Adjuster
Beveled & chromed. No visible fasteners! Most tucked-in holder on market. Made from T-6 billet aluminum polished and chrome plated. Fits 4x7 license plates only. Specify make and model when ordering. Available for most models.
Military Sticker Plate
Made of 16 gauge steel. Has a surface area of 2"x6" for military base sticker. Comes in two versions. CV420-C & CV420-B mounts on front forks, using the two brake caliper bolts on 2000 & up Big Twins and Sportsters. CV422-C & CV420-B mounts on frame down tubes. Available in chrome or black powder coated.
MoFlow Air Cleaners
The MoFlow™ air cleaner assembly is made from aluminum, polished and chrome plated. Hidden fasteners and internal breather tube make for a clean look. Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum flow and protection for your motor. Seal breather assembly velocity plate and all necessary mounting hardware included. Adapter for Mikuni carbs sold separately. Available in Chrome, Gloss or Wrinkle Black Powder Coated.
Other powdered coated colors are available for an additional cost. Please call (619) 295-7800, or email for more details.
WARNING! This product can be used for any street or racing applications where you want maximum performance for the state of California. EO #D-668
Motor Kapz
Motor Kapz are designed to cover the large motor mount bolts on the front of all Softail Twin Cam® motors. Machined from T-6 billet aluminum and then chrome plated for a beautiful finished look.
Multitude Toppers
Multitude Sissy Bars
Screw on your attitude. Made from 9/16 square steel bar, the Multitude sissy bar accommodates any knob with a 3/8-16 thread (We offer five cool toppers). Side plates must be purchased separately. The Multitude fits all side plates except for Plug-N-Play®. Order by style, size and width. For show use only.
"The Correct" Rear Wheel Pulley Spacers
Made from 6061 T6 aluminum. Machine finished. CV-2002 allows you to use late model 1-1/8 pulley on early style wheel. CV-2003 & CV-2004 spacer allows use of any combination of early or late style wheel, pulley, or sprocket combination.
Patent pending.
NOTE: Spacers are designed to work on hubs with a .187 flange height.
Pyramid Cover
The CycleVisionsSM Pyramid is designed to cover the three holes left when relocating stock license plates (above the stock tail light, or the Eliminator™ tail light on your rear fender). Polished and chrome plated aluminum construction.
Sissy Bar Side Plates - Deuce
Ridge mount sissy bar side plates for Harley Davidson Deuce. Accomodates all 8-3/4" wide Cycle Visions Attitude style sissy bar sticks or stock Harley Davidson sissy bars. Made of 120 thick steel and polished, and chrome plated.
Speedball Front Axle Caps
The illusion of speed—even at a standstill! Made from aluminum. Polished and chrome plated. Specify make and model when ordering.
Tach Mount
Our curvaceous Tach mount is an excellent addition to Road Kings® and Softails® equipped with the Nacel headlight kit. This Tach mount accepts a 17⁄8-inch tachometer. When installed there are NO visible fasteners or wires—just chrome. For maximum usability our Tach mount fits with or without detachable windshield and windshield bag. They are machined from solid T-6 aluminum and chrome plated for a highly polished and finished look. Available with tach.
Tech Trim
Light Tech Trim. Fits 96-08 FLHT/FLHX. It is available in Chrome or Black.
Windshield Molding. Fits 96-Up FLH. It is available in Chrome or Black.
The Squealer Brake Pads
Made from completely organic Kevlar aramid fibers, very low-abrasion. Stay safe with sound - a unique squealing sound lets you know when it's time to replace your pads. Prevents damage that can occur to rotor when pads are over worn. The Squealers provide excellent stopping power without noise and rotor galling, even on polished rotors. Fingertip control and strong, predictable brake response. · CV700 Front or Rear Brake Pads fits front of all Twin Cam 88 and Twin Cam 96 models from 2000 thru 2008, except the front of Springer Softail models. Fits rear of all Twin Cam 88 and Twin Cam 96 models from 2000 thru 2008. Also fits the front and rear of all Sportster models from 2000 thru 2003, and all V-Rod models from 2002 thru 2005. · CV701 Rear Brake Pads fits rear for Big Twin & Sportster models Late 1987 thru 1999. Fits rear Hayes calipers on all Sportster & Big Twin models except touring models.