Chrome
Attitude Stick (Sissy Bars)
Old School attitude sticks are made from 9/16 round steel bar. Maltese, Dagger and Spade styles are made from 9/16 square steel bar. Available in two sizes—approximately 30” or 18”. Side plates must be purchased separately. Fits all side plates except for Plug-N-Play®. Old School sissy bars not designed to hold passengers. Square stock will hold passengers. Part # CV8000–CV8002 fits all models and width, except Plug & Play®.
Beveled Blind Hole License Plate Frame
No visible screws makes this License plate frame ultra-cool. Chrome-plated aluminum construction.
Cover Up
This chrome billet cover allows the use of T-bars when running a Nacel headlight assembly on 84 & Up Softails®. Made from 1/8” T6 billet aluminum polished and chromed plated.
Eliminator
Clean up the clutter on the back of your bike. Combine several components into one with the Eliminator™. On FLH models this neatly replaces your existing taillight, turn signal assembly and license plate mount (plug-in wiring is included). Covers all existing holes and no painting required. On all Softail's and Sportster's, if you remove the existing turn signals you must replace them with "button head" bolts (not included). On all Dyna's, if you remove the existing turn signals you must replace them with "button head" bolts and Recess cover PN 47531-06(not included). The Eliminator™ is the perfect companion to our Baglites™. Made from aluminum, polished and chrome plated, our lights are LED. Brighter, safer, cooler.
Illumabezel
Give your bike a facelift with our chrome-plated plastic bezel, smoked gray lens and integrated L.E.D. run and turn signal. Fits 98 & Up Road Glide® Fairings.
Patent pending.
"In Close" License Plate Holder & Axle Adjuster
Beveled & chromed. No visible fasteners! Most tucked-in holder on market. Made from T-6 billet aluminum polished and chrome plated. Fits 4x7 license plates only. Specify make and model when ordering. Available for most models.
Injecticover
Cover your fuel-injector. Made from 16-gauge steel polished and chrome plated.
Little Light Brackets
This little compact light bracket is the ticket for “where do I mount the turn signals?” Made from cold rolled steel and beautifully polished and chrome plated. For custom applications.
Maltese Cross Side Mount License Plate
This unique product incorporates the Maltese Cross Tail Light License Plate Frame and Axel Adjuster all in one. Will not work with saddlebags. Made from T-6 billet aluminum. Available in Chrome or Black Powder Coated. Includes Maltese dual filament light. Light housing is cast aluminium polished and chrome plated. Fits 4" x 7" license plates only. Not D.O.T. approved.
Military Sticker Plate
Made of 16 gauge steel. Has a surface area of 2"x6" for military base sticker. Comes in two versions. CV420-C & CV420-B mounts on front forks, using the two brake caliper bolts on 2000 & up Big Twins and Sportsters. CV422-C & CV420-B mounts on frame down tubes. Available in chrome or black powder coated.
MoFlow Air Cleaners
The MoFlow™ air cleaner assembly is made from aluminum, polished and chrome plated. Hidden fasteners and internal breather tube make for a clean look. Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum flow and protection for your motor. Seal breather assembly velocity plate and all necessary mounting hardware included. Adapter for Mikuni carbs sold separately. Available in Chrome or Wrinkle Black Powder Coated.
Other powdered coated colors are available for an additional cost. Please call (619) 295-7800, or email for more details.
Motor Kapz
Motor Kapz are designed to cover the large motor mount bolts on the front of all Softail Twin Cam® motors. Machined from T-6 billet aluminum and then chrome plated for a beautiful finished look.
Multitude Sissy Bars
Screw on your attitude. Made from 9/16 square steel bar, the Multitude sissy bar accommodates any knob with a 3/8-16 thread (We offer five cool toppers). Side plates must be purchased separately. The Multitude fits all side plates except for Plug-N-Play®. Order by style, size and width. For show use only.
Pyramid Cover
The CycleVisionsSM Pyramid is designed to cover the three holes left when relocating stock license plates (above the stock tail light, or the Eliminator™ tail light on your rear fender). Polished and chrome plated aluminum construction.
Ricco Bag Lights
These slick, chrome-plated LED Rectangular Bag Lites come with a special feature available nowhere else - a run-turn-brake controller (which only controls these lights) that illuminates the turn mode amber and the run and brake function in red. Complete with gasket and simple plug-in wiring. Fits 96 & Up 8-pin connector. If you are eliminating your rear stock turn signals and using the "Ricco" Bag Lights as your only rear turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer (CV4820).
NOTE: Installation requires cutting a hole in the saddle bag. Comes with cutting template. Not DOT approved.
Shift Rod Extensions
Extends any 5/16 x 24 stock or customs shift rod 2” or 3”. Made from 1018 cold roll steel. Polished and chrome plated.
Sissy Bar Side Plates - Deuce
Ridge mount sissy bar side plates for Harley Davidson Deuce. Accomodates all 8-3/4" wide Cycle Visions Attitude style sissy bar sticks or stock Harley Davidson sissy bars. Made of 120 thick steel and polished, and chrome plated.
Slick Signals License Plate Frame
Slick Signal License Plate Frame & Turn Signals feature LED two-function lights. Can be wired up as run & brake or run & turn. Fits 4" x 7" license plates. Made from aluminum and polished and chrome plated. Not D.O.T approved. For custom applications.
Speedball Front Axle Caps
The illusion of speed—even at a standstill! Made from aluminum. Polished and chrome plated. Specify make and model when ordering.
Tach Mount
Our curvaceous Tach mount is an excellent addition to Road Kings® and Softails® equipped with the Nacel headlight kit. This Tach mount accepts a 17⁄8-inch tachometer. When installed there are NO visible fasteners or wires—just chrome. For maximum usability our Tach mount fits with or without detachable windshield and windshield bag. They are machined from solid T-6 aluminum and chrome plated for a highly polished and finished look. Available with tach.
Tech Trim
Light Tech Trim. Fits 96-08 FLHT/FLHX. It is available in Chrome or Black.
Windshield Molding. fits 96-Up FLH. It is available in Chrome or Black.